Clearance Crossover vs. Transfer:
Similar Words, Different Workflows
Clearance crossover and transfer are not defined terms in SEAD 7 or 32 CFR 117. See what each word may mean and six questions to ask instead.
Updated October 26, 2026
Security Clearance
Clearance crossover has no single federal definition. SEAD 7, the directive that sets how one agency accepts another agency’s investigation and eligibility decision, never uses the word. Neither does 32 CFR Part 117, the rule for cleared contractors. Both say “reciprocity.” So when a recruiter says crossover or transfer, the word alone does not tell you which office decides, which database gets checked, or what you will be allowed to do on day one.
One federal document that does use the term is written for the Intelligence Community. ICPG 704.5, ODNI’s guidance on the Scattered Castles database (file-dated February 25, 2020), tells IC elements to update the database about “granted crossover clearances and access approvals.” It does not say what a crossover clearance is, so the word will mean different things on different calls. Ask about the workflow instead.
- Different documents, different words: SEAD 7 and Part 117 say reciprocity; the IC database guidance says crossover; recruiters often use transfer loosely for the whole job move.
- Five business days is the SEAD 7 deadline for the reciprocity decision, and the count leaves out employment processing, extra checks, and any polygraph.
- Seven exceptions in SEAD 7 can stop automatic acceptance, including an investigation more than seven years old and temporary (interim) eligibility.
- Eligibility is not access: access also needs a classified contract that calls for it, the employer’s own clearance at that level, need-to-know, and a signed nondisclosure agreement.
- Six plain questions work better than either word.
Why do recruiters use crossover and transfer for different things?
Because the federal rules do not settle the vocabulary. SEAD 7 and Part 117 say reciprocity, the IC guidance says crossover, and employers add transfer for the whole job move. Each word can point to a different office, database, and timeline.
Three documents matter. SEAD 7, effective November 9, 2018, applies to “any executive branch agency, authorized investigative agency, and any authorized adjudicative agency.” 32 CFR 117.10 covers eligibility decisions for contractor employees and hands the reciprocity question to SEAD 7 (the longer explanation of security clearance reciprocity covers the rule itself). ICPG 704.5 applies to the IC.
| Word | Where it appears | What it may point to | What to ask |
|---|---|---|---|
| Reciprocity | SEAD 7; 32 CFR 117.10(a)(6) and (h) | Acceptance of an existing investigation, adjudication, or active eligibility determination | Which of those three is the new office relying on? |
| Crossover | ICPG 704.5, undefined; recruiter talk | The IC guidance lists “granted crossover clearances and access approvals” among items to record in Scattered Castles | Which community’s records, and which access approvals, are involved? |
| Transfer | Recruiter talk; Part 117 uses it for classified material and ownership stock, not a person’s eligibility | The whole move: new employer, updated records, new access | Which of those steps is the speaker describing? |
What does a clearance transfer cover?
Recruiters often use it loosely for the whole move: a new employer, a check of your existing eligibility, updated records, and a new grant of access. Only one of those parts is reciprocity.
For a contractor employee, the cognizant security agency (the CSA, one of five agencies: DoD, DOE, NRC, ODNI, or DHS) is responsible for determining eligibility. Under 117.10(a)(6), a contractor “will not submit a request for an eligibility determination to one CSA if the employee applicant is known to be cleared or in process for eligibility for access to classified information by another CSA.” Reciprocity under SEAD 7 is used instead, and the contractor gives the new CSA your full name, date and place of birth, Social Security number, clearing agency, and type of investigation for verification, so have them at hand. That applies to someone cleared through a different CSA, for example a move from a DoD-cleared job to a DOE-cleared one. Within DoD, the security manager starts from the eligibility showing in DISS and the date of the last investigation, according to DCSA’s DISS FAQ. The post on what a recruiter needs up front to verify a clearance covers the recruiter’s side.
Access is a separate step. Under 117.10(a)(1), the contractor must find that access is essential to a classified contract, and it may give an employee access only at or below the level of its own entity eligibility determination. The employee also needs a valid need-to-know, a favorable eligibility determination at the appropriate level, and a signed nondisclosure agreement.
What does the receiving side actually do?
The receiving side recognizes work already done: it checks records, accepts the earlier investigation or decision, and records the result. SEAD 7 calls that reciprocity and gives it a five-business-day clock. When the requirements are met, the receiving office is not supposed to start the vetting over.
SEAD 7 defines reciprocity as acceptance of an existing background investigation, a national security eligibility adjudication, or an active eligibility determination granted by an executive branch agency. The agency reviews Scattered Castles, the DoD personnel-security system (named JPAS in the directive), the Central Verification System (which the directive places at OPM), “or successor databases.” It accepts adjudications “at the same or higher level” unless an exception applies. When the requirements for acceptance are met, a new SF-86 “shall not be requested,” though the agency may ask what changed since your last one.
Section G.1 says reciprocity determinations “shall be made within five business days of receipt by the agency’s personnel security program for security processing,” and it places employment, suitability, and fitness processing outside that count. Extra investigative checks are not counted. A required polygraph follows a preliminary determination and sits outside the five days.
You do not run these steps. For a contractor employee, 117.10(h) makes the applicable CSA responsible, and a current eligibility based on an investigation of enough scope “will provide the basis for a new eligibility determination.” The prior investigation is used without further investigation or adjudication unless the CSA learns of significant derogatory information that was not previously adjudicated.
Which database holds the record, and whose community is it?
DISS, which DCSA describes as the system for DoD military, civilian, and contractor personnel security, holds the DoD side. Scattered Castles is the IC’s repository, including SCI access. SEAD 7 tells agencies to review Scattered Castles, the DoD system, and the Central Verification System, so a move between communities can involve an office reading a record kept in a system it does not normally use.
| System | Community | What the official page or policy says |
|---|---|---|
| DISS | DoD military, civilian, and contractors | The enterprise-wide solution for personnel security, suitability, and credentialing management. It replaced JPAS as the system of record on March 31, 2021. |
| Scattered Castles | Intelligence Community | The IC repository for all clearance and access determinations, and the authoritative source for verifying clearances, SCI, and reciprocity. |
A fuller comparison of Scattered Castles versus DISS covers how the two differ. When a recruiter says your clearance is “in the system,” ask which system.
System names are also moving. DCSA’s news item of August 4, 2026 covers industry’s move to DISS for initiate-and-review functions: live on July 31, 2026, with NBIS Agency turned off on November 30, 2026. SEAD 7 itself says “successor databases,” so ask the security officer to name the system in use now.
Does either word guarantee access?
No. Neither word promises a start date or a level. SEAD 7 lists seven situations where acceptance is not automatic, and access to classified information also needs a classified-contract requirement, need-to-know, and a signed nondisclosure agreement. For a contractor employee, access to SCI, special access programs, and restricted data is decided separately by the granting authority (117.10(a)(8)).
The seven exceptions in SEAD 7 paragraph E.2 are these:
- New information: something of adjudicative relevance has become known to agency officials since the last investigation and indicates the person may no longer satisfy adjudicative requirements.
- Age: the most recent investigation is more than seven years old, unless the Security Executive Agent has directed otherwise. Agencies may accept an older one case by case, and if they do, the accepting agency “shall immediately initiate a reinvestigation.”
- A recorded exception: the last adjudication carried an exception under SEAD 4. Agencies may still accept it on their own risk assessment.
- Bond Amendment: a disqualifier applies and the person needs SCI, special access programs, or restricted data.
- Agency-specific rules: the Security Executive Agent has approved extra requirements for that agency.
- Temporary status: the eligibility was granted on a temporary (interim), limited, or one-time basis.
- Current adverse status: the eligibility is currently denied, revoked, or suspended. Absent mitigating factors, a person found ineligible should stay ineligible for at least one year from the denial or revocation.
These are exceptions to the duty to accept, not automatic refusals, and two of them expressly leave room to accept anyway. A footnote to the last item matters to anyone changing jobs: the “denied, revoked, or suspended” exception does not include an administrative termination due to a change of need-to-know, a departure from a sensitive position, or no longer being affiliated with the U.S. Government.
Temporary status gets its own caution. SEAD 7 paragraph E.7 tells agencies to accept an active determination for visits and coordination without asking for updated information, but “this does not apply to temporary (interim) eligibility determinations, when taking security sponsorship over the covered individual, or to joint duty, detailee, task force, or similar assignments.” Under 117.10(l), a contractor employee’s temporary eligibility may not exceed one year unless the CSA approves it. The post on how an interim security clearance works covers that path.
How do same-company and new-company moves differ?
Inside one company, the contractor may manage the records itself and, after a pause in access, may restore access without further investigation if you stayed employed and the other conditions are met. Moving to a new company brings in the new CSA and the reciprocity check; the post on moving a clearance to a new contractor covers that sequence from the candidate’s side.
| Step | Same company, new contract or program | New company |
|---|---|---|
| Who looks at the record | Within one business organization, the contractor may centrally manage eligibility and access records (117.10(a)(4)). | The applicable CSA checks for an existing determination under SEAD 7 (117.10(h)). If you were cleared by a different CSA, the new employer passes it your identifiers (117.10(a)(6)); within DoD, the security manager checks DISS. |
| Do you start over? | If access ended only because no current requirement existed and you stayed in continuous employment, the contractor may provide access again without further investigation, based on CSA guidance, if you remain eligible with a current investigation of a scope that meets or exceeds what the access requires and nothing new and derogatory is known (117.10(i)). | When the requirements for acceptance are met, SEAD 7 bars a new SF-86 and new investigative checks, though the agency may ask about changes since your last SF-86. |
| If there is a gap | The break-in-access rule assumes continuous employment. A break in employment falls under 117.10(j) instead. | After a break in employment, access may be given based on CSA guidance if you remain eligible with a current investigation, but not if the break cost you eligibility and there is no new CSA determination (117.10(j)). |
Which six questions replace the label?
These six questions turn “can you cross over” or “will it transfer” into answers a security officer can give.
- Is my eligibility final or temporary? Temporary, limited, and one-time eligibility are an exception to acceptance, and a contractor-employee temporary eligibility is capped at one year unless the CSA approves more.
- When did my last investigation close, and am I enrolled in continuous vetting? More than seven years is an exception unless the Security Executive Agent has directed otherwise, and an agency that accepts an older investigation must start a reinvestigation. DCSA’s DISS FAQ has security managers weigh that date and enroll people in continuous evaluation, so the date may not settle it alone.
- Is anything open on my record? New information since the last investigation, a recorded exception, and a current denial, revocation, or suspension each appear in the SEAD 7 list of exceptions.
- Which system will you check, and who reads it? DISS, Scattered Castles, CVS (the Central Verification System, which SEAD 7 places at OPM and which DCSA’s site now lists among its systems), or a successor.
- Does the role need SCI, a special program, or a polygraph? SCI, special-program, and restricted-data access is decided by the granting authority, and a required polygraph adds time that sits outside the five business days.
- What starts the clock, and what does my start date wait for? The five days run from receipt by the personnel security program and leave out employment processing, so ask what else must finish first, including whether the company’s own clearance covers the level you need.
Before the next call, write down your clearance level, your clearing agency, the type of investigation, the date it closed, and whether your eligibility is final. Then put the six questions to the recruiter and the facility security officer, and ask for answers in writing.
Frequently Asked Questions
Is clearance crossover the same as clearance transfer?
Not in SEAD 7, Part 117, or the IC database guidance. The first two use reciprocity, ICPG 704.5 uses crossover undefined, and transfer is loose recruiter shorthand.
Do I need to fill out a new SF-86 for a crossover?
Not when the investigation and adjudication meet the requirements for acceptance: SEAD 7 says a new SF-86 “shall not be requested.” The agency may still ask what changed since your last one.
How long does a clearance crossover take?
SEAD 7 sets five business days for the reciprocity decision, counted from receipt by the agency’s personnel security program. Employment processing, extra checks, and a polygraph sit outside that count, so your start date can fall later.
Does leaving my job end my clearance?
Eligibility is the CSA’s determination, while access is something a contractor gives. After a break in employment, 117.10(j) allows access based on CSA guidance if you remain eligible with a current investigation, but not if the break cost you eligibility without a new CSA determination.
Who decides whether my clearance carries over?
For a contractor employee, the applicable CSA is responsible under 117.10(h), and the company’s facility security officer is your contact. For a federal agency, the agency’s personnel security program makes the SEAD 7 determination.