Starting an eApp Submission in NBIS:
Invitations, Deadlines, and Support
How to start eApp for a clearance: spot the NBIS invitation, sign in, read your deadline, and call the right support line.
Updated October 26, 2026
Security Clearance
You cannot open an eApp submission on your own. A security manager or facility security officer (FSO) at the organization sponsoring your investigation starts the request in NBIS, and eApp then emails you an invitation. DCSA tells applicants who “have been asked to fill out an investigative form” to use eApp; until that email arrives, there is nothing to open.
Key takeaways
- Sponsor first: the invitation comes after your sponsor’s security office starts the request. Applicants have their own door, separate from the one FSOs use.
- Check the subject line, then confirm: *ACTION REQUIRED* Activate Your New NBIS eApp Account is printed on DCSA’s public pages, so a lookalike can copy it. Ask your point of contact that an invitation went out. The username in the real email is the only one that opens your form.
- 150 minutes: DCSA’s guide gives that as the average time for an SF-86, gathering included, and says it can take several hours. Your sponsor may set the time allowed.
- 5 attempts: that is the stated limit for the Social Security number and date of birth check. After that, reset your login or call your FSO.
- Two phone lines: 878-274-1344 for access problems, 878-274-5091 for questions about completing the form.
Why can’t you start an eApp submission yourself?
The request begins with your sponsor, not with you. A security manager or FSO at the sponsoring organization initiates the case, and eApp then emails you the invitation.
DCSA’s NBIS page puts two logins side by side. The applicant login is eApp. The other, NBIS Agency, is the application that lets security managers, special security officers and FSOs “process background applications and manage them through the investigations’ process.” Applicants use the first.
Who counts as your sponsor depends on your status. DCSA’s forms help page sends military applicants to the security officer in their command and federal civilians to the security officer or HR representative at the agency. DoD contractors go to the FSO at their company. Other federal contractors go to the security officer or HR representative at the agency.
If you are a candidate waiting on a cleared employer, the practical question for the recruiter is whether the FSO has started your request. DCSA says NBIS replaces the older e-QIP system but has not set a date for shutting e-QIP down, and some agencies are still inviting applicants through e-QIP while they move over. The earlier piece on e-QIP versus eApp covers the change. DCSA’s own line is short: “When you are in NBIS, you are using eApp, not e-QIP.”
How do you recognize the real eApp invitation?
The invitation comes from NBIS with the subject line *ACTION REQUIRED* Activate Your New NBIS eApp Account. DCSA names that subject and a no-reply NBIS sender on a public page, so a lookalike message can copy both. A matching subject is necessary, not proof. The username inside the real invitation is the only one that opens your form.
DCSA’s multi-factor assistance page gives the sender as [email protected]. The December 2025 login job aid writes it as [email protected] in its returning-user steps. DCSA uses both spellings, so the sender line alone settles nothing.
Before you click, ask the point of contact who requested your case whether an invitation went out. If anything looks wrong, do not click through it.
Three addresses show up in DCSA’s applicant material, and each has one job:
| Address | Who uses it | Where DCSA says so |
|---|---|---|
| eapp.nbis.mil | Applicants completing a form | The “eApp (For Applicants) Login” button on the NBIS page |
| vetting.nbis.mil | Security managers, special security officers and FSOs | The “NBIS Agency (For SSOs/FSOs) Login” button on the same page |
| icam.dcsa.mil | Returning users signing in or resetting a password | The existing-user and self-service reset steps in the job aid |
One more rule from the same page: the only way into your form is the username from the invitation. A PIV or CAC card does not work for applicants. DCSA says using one “will result in an error,” and the job aid adds that applicants should never choose smart card login.
What happens the first time you sign in to eApp?
You follow the link in the invitation, set a password across three short screens, open the NBIS eApp tile, accept the instructions, confirm your identity with your Social Security number and date of birth, and choose your form. DCSA’s job aid, updated 3 December 2025, shows each screen.
The job aid sets out the new-user path in order:
- Select the link in the invitation email.
- Set a password. Screen three, for security methods, is optional, and the job aid says you can click continue to bypass it.
- Select the NBIS eApp tile.
- Read the instructions for completing the form and select yes to proceed.
- Enter your Social Security number and date of birth.
- Select the available form.
The multi-factor page adds a wrinkle. It says new applicants “will use an authentication application” to get in, and tells existing applicants to choose how they receive one-time passcodes. Email is allowed, but DCSA “highly” recommends an authenticator app. If your screens differ from the job aid, call the DCSA help desk.
Once you are in, eApp opens a list headed “My Forms.” Each row shows the form name and version, the organization, a point of contact, the date added and a status. The prompt above the list is plain: select the form and complete it “as soon as possible to avoid delays in processing.” The instructions for the form itself sit behind a link labeled “Instructions” in the top right corner.
Returning later is different. You go to icam.dcsa.mil, enter the username from your first email, and then enter the one-time code from whichever method you set up, followed by your password. The job aid’s returning-user steps show the code arriving by email; if you chose an authenticator app, the code comes from the app.
What if eApp says your Social Security number or date of birth is wrong?
Check the format first: date of birth as MM/DD/YYYY, and the Social Security number as nine digits with no dashes. If the format is right, the profile your sponsor entered is the next place to look, and only your FSO or security manager can change it.
DCSA’s sheet on incorrect user data (the file is dated July 2025) lists two common mistakes: a two-digit year and dashes in the Social Security number. It states a limit of 5 attempts. Past that, it recommends the self-service reset, and if the problem persists, your FSO or security manager.
The sheet is written for the security office, and it describes what happens when your entries are right but the stored profile is not. The office cancels your current form, updates your subject profile or calls the NBIS help desk, and creates a new case. That work happens on the sponsor’s side, so ask what to expect rather than starting over alone.
Applicants with no Social Security number get a pseudo number. NBIS Agency assigns it, your FSO or security manager has to tell you what it is, and the leading “S” must be uppercase.
How long do you have to finish the form?
DCSA publishes no single deadline for applicants. Its guide says the sponsoring organization “may establish the amount of time to complete the form,” so the window your sponsor gives you is the one that counts. Ask for it in plain terms and write it down.
The Subject eApp Guide (version dated 29 November 2023) puts the average SF-86 at 150 minutes, gathering included, and says the form “can take several hours.” It also says to begin as soon as possible “to ensure the invitation does not expire.”
The guides do not say what happens to an invitation that lapses, so find out before it does. Raise it with your point of contact while you still have time.
Use the hours before you sign in. For most sections the guide expects information going back 10 years: addresses, schools, employers, and the people who can verify them. It also tells applicants to account for every period: time without a job goes in as unemployment. DCSA’s November 2025 SF-86 guide adds that employment dates are not stretched to fill a gap. The 2023 guide also says to avoid answers such as “I do not know.” Leaving information out has consequences of its own, which the post on missing SF-86 information walks through.
How do saving, section status, and error marks work?
eApp saves as you type. A solid green dot beside a section in the navigation menu means it is complete; no dot means information is missing or something has an error. Open that section’s review page to see what the system found.
According to eApp’s help page, the form is validated when you open a section’s review page, and a list of errors appears in a red box at the top. Each item links to the question. At the top of the navigation menu, a counter shows how many sections you have finished, and all of them must be filled out before the form can be submitted.
| What you see | What it means | What to do |
|---|---|---|
| Save icon on a screen | The form auto-saves; the icon shows when the last save happened | Check it before you close the window |
| Solid green dot | Section or subsection is complete | Nothing |
| No green dot | Information is missing, or there are errors | Open the section’s review page |
| Red box on a review page | The system found errors and lists each question | Follow each link and correct the answer |
| Red warnings while you fill in | Something is unfinished or flagged | You may skip it and return, but fix it before the final submission |
A few habits from the guides. Use the section list on the side to move around, because the guide says not to use the browser’s Back button. The circle question-mark icon next to a question opens help with acronyms and definitions. And you can change your answers as often as you like before final submission, since only your final answers are submitted.
If you are sure an error is wrong, the help page says to contact support, which is the Applicant Support line.
Who do you call when something goes wrong?
Match the problem to the office. The DCSA help desk handles access and multi-factor trouble. Applicant Support handles questions about completing the form. Your sponsor’s security office answers questions about your own history, which DCSA routes to the security officer.
| Problem | Contact | Details from DCSA |
|---|---|---|
| Cannot sign in, password reset, one-time code, authenticator app | DCSA help desk | 878-274-1344, [email protected], Monday to Friday, 6:00 a.m. to 8:00 p.m. EST |
| How the form works, an error that looks wrong, finding your FSO | Applicant Support | 878-274-5091, [email protected], Monday to Friday, 6:00 a.m. to 5:00 p.m. EST |
| Social Security number or date of birth rejected after you checked the format | The FSO or security manager who started your case | Named as the point of contact in your form list |
| What a question means for your own history | Your sponsor’s security officer | Command security officer, agency security officer or HR, or company FSO, by status |
The eApp help page lists the same 878-274-5091 line and gives [email protected] as its email, so you may see two addresses for one team. DCSA’s pages quote hours in Eastern time as “EST.”
Keep the two kinds of question apart. The help desk gets you into the system; DCSA sends “tailored answers to questions about your investigative questionnaire” to the security officer. DCSA’s guide itself says it is not a recap of every question on the forms.
How do you know your eApp submission is finished?
The final review is a preliminary validation: eApp flags answers it finds missing or wrong, and every error must be fixed before the form goes. Passing that check does not mean the form is accepted. After a successful submission, eApp takes you to a page where you can save a PDF of the completed form. Save it then, because you will not get another chance.
On that final page a “Back to Section” button returns you to anything flagged. The help page is blunt about the PDF: you will not have the opportunity to save it once you leave the form. The guide says the same thing in different words: once the form is fully completed, save a copy.
DCSA’s November 2025 SF-86 guide says that failing to provide complete and accurate information “will result in the rejection of the form for corrections,” which delays vetting. For a contractor employee, 32 CFR 117.10(d) has the FSO or another employee the company designates review the SF-86 for adequacy and completeness. A quiet inbox after you submit is therefore not proof the form is done; ask your point of contact what you should expect to see.
Submitting the form is one step in the process, not a decision. DCSA describes NBIS as running from initiation and application through investigation, adjudication and continuous vetting, and what follows for cleared personnel is covered in the post on Trusted Workforce 2.0 and NBIS.
Today, ask your point of contact for the date your sponsor expects the form, write it next to the invitation, and block out the 150 minutes plus the time it takes to gather your addresses and references.
Frequently Asked Questions
Can I start eApp before my sponsor sends the invitation?
No. The first-time steps in DCSA’s job aid begin with the invitation email, and DCSA directs people who “have been asked” to fill out a form to eApp. Ask your recruiter or FSO whether your request has been started.
Does my CAC or PIV card work for eApp?
Not for applicants. DCSA says PIV or CAC login will not give access to your eApp application and will produce an error. Use the username and password from your invitation.
What do I do if I forget my password?
Go to the main eApp login page, enter your username and follow the prompts. DCSA says a reset link goes to the email address on your account. The job aid also shows a self-service route through icam.dcsa.mil with a one-time code.
Is eApp the same thing as e-QIP?
They are two systems, and eApp is the one inside NBIS. DCSA says that when you are in NBIS, you are using eApp, not e-QIP. It also says it is undetermined when e-QIP will be shut down, so a sponsor that has not moved over yet may invite you to e-QIP instead. Go by the invitation you actually received and confirm it with your point of contact.
Which forms can eApp hold?
eApp’s own form list says it contains the investigative Standard Forms and the Personnel Vetting Questionnaire (PVQ). DCSA’s forms page lists three standard forms and a supplemental: the SF-85, the SF-85P, the SF-85PS (supplemental to the SF-85P) and the SF-86. Your form list shows which one was assigned to you.